P&E’s USB BDM MULTILINK is an easy-to-use debug and programming interface for Freescale’s HCS08, HC(S)12(X), RS08, and ColdFire V1 lines of microprocessors. The USB BDM MULTILINK is a member of P&E’s family of USB Multilinks, which allow the PC to communicate with a target processor through the USB port of the PC. The Multilink controls the microprocessor by accessing the debug port of the target.
The Multilink’s speed and reliability make it ideal for development. It is supported by P&E software, Freescale’s CodeWarrior, and other third-party software (available separately). P&E’s Flash Programmer software can be used with the Multilink to program internal and external flash memory devices. The USB BDM Multilink also works with P&E’s In-Circuit Debugger software to control the target processor’s execution, read/write registers and memory, and perform full C source-level debug.
For an advanced interface which additionally supports Ethernet and serial communications, provides power to the target, and offers several automated programming solutions, the Cyclone PRO is also available from P&E and Freescale. More information on the USB BDM Multilink and Cyclone PRO is available at www.pemicro.com.
Features
- Real-time in-circuit debug through HCS08/RS08 or HCS12 BDM interface
- Fast in-circuit Flash programming
- Small unobtrusive size (approximately 3" x 2" x 3/4") Supports 1.8 V to 5.5 V HCS08/RS08s and HCS12s
- USB-to-BDM interface
Related Software & Tools
- DEMO9S12XDT512: MC9S12XDT512 Demonstration Board
- HCS12DT256SLK: 16-Bit HCS12DT256 Student Learning Kits
- HCS12XDT512SLK: 16-Bit HCS12XDT512 Student Learning Kits
- HCS08QG8SLK: 8-Bit HCS08QG8 Student Learning Kits
- 13192DSK: 13191/92 Developer's Starter Kit
- CSM08RG60SLK: HCS08 Application Module Student Learning Kit
- EVB9S12XDP512: MC9S12XDP512 Evaluation Board
- 1321xDSK: Development Software Kit
- 1321xNSK: 1321xNSK -Network Starter Kit
- DEMO9S08RG60: MC9S08RG60 Demo Board
- DEMO9S08QG8: MC9S08QG8 Demo Board
- DEMO9S08AW60E: Demonstration Board
- DEMO9S08QD4: DEMONSTRATION Board
- DEMO9S08JR12: Demonstration Board for 8-Bit MCU + RF SoC device
- DEMO9S08SG8: Demonstration board for the MC9S08SG8/4
- DEMO9S08SG32: Demonstration board for the MC9S08SG32
- DEMO9S08DZ60: S08D Family Demonstration board
- DEMO9S08AC60E: Demo Board for S08AC
- DEMO9S08SH: S08SH Family Demonstration board
- DEMO9S08QA4: Demonstration Board
- DEMOQE128: MCF51QE128 Demonstration Board
- DEMOQE8: QE8 Demonstration board
- DEMOJM: Flexis™ JM Demonstration Board
- DEMO9S08EL32: EL and SL family Demo Board
- DEMO9S08EL32AUTO: Demonstration board for the S08EL/SL device for Automotive applications
- DEMO9S08QB8: QB8 Demonstration Board
- DEMO9S08SE8: SE8 Demonstration Board
- DEMO9S08LG32: S08LG32 demonstration board
- DEMO9S08MP16: S08MP16 Demonstration board
- TWR-S08LL64-KIT: TWR-S08LL64 Tower System 8-bit Segment LCD Module
Supported Devices
Target Architectures
- HCS08
- HC(S)12(X)
- RS08
- ColdFire V1
Applications
- Development/Prototyping
Hardware Features
- Fast, hassle-free USB 2.0 communications interface
- Draws power directly from the USB port – no external power supply needed
- Multi-voltage support for targets ranging from 1.8 to 5.5 Volts
- Compact size
Software Compatibility
- P&E HCS08/HC(S)12(X)/RS08 Flash Programmers
- P&E HCS08/HC(S)12(X)/RS08 In-Circuit Debuggers
- P&E HCS08/HC(S)12(X)/RS08 Development Packages
- Freescale CodeWarrior
- Third-party software
ColdFire is a registered trademark of Freescale, Inc.
Increase Your Knowledge
- Design News Update Subscribe for design tips, tricks and product news delivered to your inbox.
- On-Demand Training Learn from the experts at your convenience.
