Live Chat Not Available: Create Service Request
|
|
PREPRODUCTION
The first SoCs in the QorIQ T series are the flagship T4240 with 12 physical cores supporting 24 virtual cores and the T4160 with 8 physical cores supporting 16 virtual cores. With frequencies scaling to 1.8 GHz, large caches, hardware acceleration and advanced system peripherals, these products target applications that benefit from consolidation of control and data plane processing in a single SoC.
This page contains information on a preproduction product. Specifications and information herein are subject to change without notice.
For additional information and sample availability contact your local Freescale Sales Office or Freescale Authorized Distributor.
Features
- Twelve dual threaded e6500 cores built on Power Architecture® technology
- Arranged as clusters of four e6500s sharing a 2 MB L2 cache.
- Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant)
- Three levels of instruction: user, supervisor, and hypervisor
- Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support
- Up to 2.13GHz
- Memory Pre-Fetch Engine
- Datapath Acceleration Architecture (DPAA) incorporating acceleration for the following functions:
- Packet parsing, classification, and distribution at up to 50 Gbps
- Queue management for scheduling, packet sequencing, and congestion management
- Hardware buffer management for buffer allocation and de-allocation
- Integrated security acceleration (SEC 5.0) at up to 40 Gbps
- Signature detection (PME) at up to 10 Gbps
- Decompression/Compression Acceleration at up to 20 Gbps
- DPAA chip to chip interconnect via RapidIO Message Manager
- Security with Trust Architecture
- 32 SERDES lanes at up to 10.3125 GHz
- Ethernet Interfaces
- Up to four 10 Gbps Ethernet MACs
- Up to sixteen 1 Gbps Ethernet MACs
- High Speed Peripheral Interfaces
- Four PCI Express® 1.1/2.0/3.0 controllers
- Endpoint SR-IOV
- Two serial RapidIO 2.0 controllers/ports running at up to 5 GHz
- Interlaken Look-Aside Interface for serial TCAM connection
- Additional Peripheral Interfaces
- Two Serial ATA (SATA 2.0) controllers
- Two high-speed USB 2.0 controllers with integrated PHY
- Enhanced secure digital host controller (SD/MMC/eMMC)
- Enhanced Serial Peripheral Interface (eSPI)
- Four I²C controllers
- Four UARTs
- Integrated Flash Controller supporting NAND and NOR flash
- Two eight-channel DMA engines
- Support for hardware virtualization and partitioning enforcement
- Trust architecture secure boot
Comparison Table
| T4240 | T4160 | |
| Cores | 12 | 8 |
| Core Clusters | 3 | 2 |
| DDR Memory Controllers | 3 | 2 |
| Serdes Lanes | 32 | 24 |
| 10GbE MAC | 4 | 2 |
Multicore Resources
- QorIQ Multicore Development Tools Software, tools and tips to ease your migration to QorIQ multicore processors
Featured Videos
