Live Chat Available
|
|
Freescale has developed the industry's first 8-bit microcontroller family with embedded CAN, embedded EEPROM and on-chip emulation/debug for the automotive and industrial markets. The S08D family offers designers scalability and flexibility of migration with pin, peripheral and tool compatibility between S08D family devices.
This highly integrated next generation family of MCUs is packed with features designed to provide increased performance, as well as save power, development time, board space and cost.
Features
S08 CPU
- 40 MHz core speed, 20 MHz bus speed on S08 CPU
- HC08 instruction set with added BGND instruction
On-Chip Memory
- Up to 128 KB flash read/program/erase over full operating voltage and temperature
- Up to 2 KB EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dualpage erase sector; program and erase while executing flash; erase abort
- Up to 8 KB RAM (16:1 flash/RAM, ratio better than competition)
Power Saving Modes
- Two very low-power stop modes
- Very low-power, real-time interrupt for use in run, wait and stop modes
Clock Source Options
- Oscillator (XOSC)—Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz–38.4 kHz or 1 MHz–16 MHz
- Multi-purpose clock generator (MCG)–PLL and FLL modes; internal reference clock with trim adjustment; external reference with oscillator/resonator options
System Protection
- Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock
- Low-voltage detection with reset or interrupt; selectable trip points
- Illegal opcode detection with reset
- Illegal address detection with reset
- Flash block protect
- EEPROM block protect
Periperals
- ACMPx—Analog comparators with selectable interrupt on rising, falling or either edge of comparator output; compare option to fixed internal bandgap reference voltage
- MSCAN—CAN protocol—Version 2.0 A, B; standard and extended data frames; support for remote frames; five receive buffers with FIFO storage scheme; flexible identifier acceptance filters programmable as: 2 x 32-bit, 4 x 16-bit, or 8 x 8-bit
- SCIx—SCI(s) with LIN 2.0 Protocol and SAE J2602 compliance; master extended break generation; slave extended break detection; LIN slave supplement on SCI1; automatic baud rate correction; message time-out detection
- SPI—Full-duplex or single-wire bi-directional; double-buffered transmit and receive; master or slave mode; MSB-first or LSB-first shifting
- I2C—Up to 100 kbps with maximum bus loading; multi-master operation; programmable slave address; interrupt-driven, byte-by-byte data transfer; broadcast mode enabled
- TPMx—One 6-channel (TMP1) and one 2-channel (TPM2); selectable input capture, output compare or buffered edge-aligned PWM on each channel
- RTC (Real-time counter)—8-bit modulus counter with binary or decimal-based prescaler; external clock source for precise time base, time-of-day calendar or task scheduling functions; free running, on-chip, low-power oscilator (1 kHz) for cyclic wake-up without external components
Development Support
- Single-wire background debug (BDM) interface
- On-chip, in-circuit emulation (ICE) with real-time bus capture
Input/Output
- 87 general-purpose I/O pins and one input-only pin
- 32 interrupt pins with selectable polarity on each pin
- Hysteresis and configurable pull-up device on all input pins
- Configurable slew rate and device strength on all output pins
Package Options
- 100 LQFP 14 x 14 mm
- 64-pin low-profile quad flat pack (LQFP)—10 x 10 mm
- 48-pin LQFP—7 x 7 mm
- 32-pin LQFP—7 x 7 mm
Miscellaneous
- EMC performance
- Wide operating voltage range: 2.7V–5.5V
Background Debugging System
- On-chip BDM
Package
- Pin-compatible with SH, QG family
Featured Documentation
- BRS08DFAMILY: S08 D-Family Fact Sheet
- MC9S08DZ60: MC9S08DZ60, MC9S08DZ48, MC9S08DZ32, MC9S08DZ16 - Data Sheet
- MC9S08DV60: MC9S08DV60, MC9S08DV48, MC9S08DV32, MC9S08DV16 - Data Sheet
- MC9S08DN60: MC9S08DN60, MC9S08DN48, MC9S08DN32, MC9S08DN16 - Data Sheet
- MC9S08DZ128: MC9S08DZ128, MC9S08DZ96, MC9S08DV128, MC9S08DV96 - Data Sheet
Featured Software and Tools
- EGUI: Freescale eGUI: Graphical LCD Driver for MCUs/MPUs
- UMultilink: Universal Multilink Development Interface
- CW-MICROCONTROLLERS: CodeWarrior for Microcontrollers (Classic IDE) - RS08/HC(S)08, ColdFire V1
- EVB9S08DZ60_128: S08D Family Evaluation Boards
- USBMULTILINKBDM: USB S08/HCS12 BDM Multilink - In-Circuit Debugger/Programmer
Target Applications
- Industrial
- Building Automation Controllers
- Industrial Machine Control
- Maritime Electronics
- Medical/Healthcare
- Health Care Equipment and Devices
S08D Family Members
| S08DZ | S08DV | S08DN | |
| Internal Flash | 60 kByte 128 kByte 32 kByte 96 kByte 48 kByte 16 kByte | 60 kByte 16 kByte 48 kByte 128 kByte 32 kByte 96 kByte | 32 kByte 60 kByte 16 kByte 48 kByte |
| EEPROM | 2 kByte 1 kByte 1.5 kByte 0.512 kByte | 1 kByte 2 kByte 0.512 kByte 1.5 kByte | |
| Serial Interface Type | CAN I2C SCI SPI | CAN I2C SCI SPI | SPI SCI I2C |
| ADC Bits | 12 bit | 12 bit | 12 bit |
| ADC Channels | 24 10 16 | 10 16 24 | 16 10 |
| Pin Count | 64 32 48 100 | 32 48 64 100 | 64 48 32 |
S08D Family Product Map
