The MSC8156E is a six-core DSP based on Freescale’s new SC3850 StarCore® technology and designed to advance the capabilities of wireless broadband equipment. It delivers industry-leading performance and power savings, leveraging 45 nm process technology in a highly integrated SoC to provide performance equivalent to six gigahertz of a single core device. The MSC8156E will help equipment manufacturers and carriers create solutions and services that enable near-term, mainstream adoption of next-generation wireless standards such as 3G-LTE, WiMAX, HSPA+ and TDD-LTE. The device is designed to lower system costs by integrating functionality into a single device that previously required multiple discrete parts.
The MSC8156E DSP delivers a high level of performance and integration, combining six fully programmable new and enhanced SC3850 DSP cores, each running at up to 1 GHz with an architecture highly optimized for wireless infrastructure applications. Developed by Freescale and integrated on chip, the MAPLE-B baseband accelerator supports hardware acceleration for Turbo and Viterbi channel decoding and for DFT/iDFT and FFT/iFFT algorithms. An internal RISC-based QUICC Engine™ subsystem supports multiple networking protocols to guarantee reliable data transport over packet networks while significantly offloading processing from the DSP cores. The security engine core (SEC) accelerates data plane encryption/decryption and code protection with minimal DSP cores intervention.
The MSC8156E embeds large internal memory and supports a variety of advanced, high-speed interface types, including two RapidIO® interfaces, two Gigabit Ethernet interfaces for network communications, a PCI Express® controller, two DDR controllers for high-speed, industry standard memory interface and four multi-channel TDM interfaces.
Freescale plans to sample the MSC8156E to alpha customers during the first quarter of 2009.
In conjunction with the launch of the MSC8156E multi-core DSP, Freescale is delivering a completely redesigned development tool suite with significant new functionality. Click here for more information.
NOTE: Consult a Freescale Semiconductor sales office or authorized distributor to determine product availability and place an order.
Features
- Six StarCore DSP SC3850 core subsystems operating at up to 1 GHz/8000 MMACS per core and up to 48000 MMACS per device.
- Multi accelerator platform engine for baseband (MAPLE-B) Highly flexible, programmable turbo and viterbi decoder supports configurable decoding parameters. It can perform up to 200 Mbps of Turbo decoding (6 iterations) or up to 115 Mbps of K = 9 (zero tail) Viterbi decoding. FFT/iFFT for sizes 128, 256, 512, 1024 or 2048 points at up to 350 million samples per second DFT/iDFT for sizes up to 1536 points at up to 175 million samples per second. Two master buses for data transfers from/to the system memory at total throughput up to 50 Gbps.
- High-speed, high-bandwidth CLASS fabric arbitrates between the DSP cores and other CLASS masters to M2 memory, M3 memory, DDR controllers, MAPLE-B and the configuration registers
- Two DDR controllers with up to 400 MHz clock (800 MHz data) rate and 32/64-bit DDR2/3 SDRAM data bus. Supports SODIMMs and up to 0.5 GB per controller,
- 32-channel DMA controller.
- Dual RISC core QUICC Engine subsystem operating at up to 500 MHz provides parallel packet processing independent of the DSP cores. Supports: Two Gigabit Ethernet controllers supporting RGMII or SGMII and SPI
- HSSI that supports two 4x SerDes ports. It includes two Serial RapidIO controllers supporting 1x/4x operation up to 3.125 Gbaud, one PCI Express controller that supports 1x/2x/4x operation. Multiplexing capability for RapidIO, PCI Express and SGMII signals through the two SerDes ports.
- Four TDM interfaces
- UART and I2C interfaces
- Eight software watchdog timers
- Sixteen 16-bit timers Two 32-bit general purpose timers per core for RTOS support
- I/O interrupt concentrator and virtual interrupt support Eight hardware semaphores
- Thirty two GPIO ports multiplexed with interface signals and IRQ inputs
- SEC optimized to process all the encryption/decryption algorithms associated with IPSec, IKE, WTLS/WAP, SSL/TLS, AES, DES, RC-4, SNOW-3G and Kasumi for 3G-LTE and 3GPP
- Boot options: Ethernet, Serial RapidIO, I2C and SPI
- Three input clocks and five PLLs
- JTAG Test Access Port (TAP) and boundary scan architecture designed to comply with IEEE Std. 1149.1™ profiling and performance monitoring support
- Reduced power dissipation with Wait, Stop and Power Down low-power standby modes
- Optimized power management circuitry
- Technology: CMOS 45 nm SOI technology in 29 mm x 29 mm, 783 ball, FC-PBGA package
