The MPC8323E Modular Development System (MDS) is designed to aid hardware and software developers using the PowerQUICC II Pro MPC8323E family. The MPC8323E MDS can be assembled using the following hardware modules: The MPC8323E MDS Processor Board (P/N MPC8323E-MDS-PB), the PowerQUICC Platform I/O Board, the PowerQUICC PMC to PCI module, and the PowerQUICC Quad OC-3 ATM and PowerQUICC T1 plug-in cards. The system also allows for an optional PCI Expansion module interface. The Platform I/O board (AdvancedTCA form factor with 4 PMC slots), along with the expansion modules, provides increased development capabilities. For example:
- PCI Host mode (3.3V 32&64 bit bus) with single agent (w/ PCI PMC card and PIB)
- Access to 2nd USB Port (with USB PMC card and PIB)
- Additional USB PHYS (UTMI, ULPI and Serial OTG)
- PCI Host mode (3.3V 32&64 bit bus) with multiple agents (w/PCI expansion card & PIB)
Features
The MPC8323 Processor board can be used as a stand alone development board that supports the following features:
- MPC8323E processor @333MHz
- MByte DDR-2 333MHz (supports optional ECC memory)
- 64-Bit PCI Edge Connector (3.3V & 5V)
- Two RJ-45 G-Ethernet ports
- USB 2.0 High Speed Device/Host/OTG port
- Dual RS232 ports
- Local Bus Interface with
- 8Mbyte Flash (expandable)
- Board Control and Status Registers (BCSR) in FBGA
- Riser Connectors to Platform I/O Board
- JTAG Debug Port
- I2C port with
- 256Kb EEPROM
- Real-Time Clock (RTC)
- SODIMM SPD EEPROM
- PCI add-in standard card form factor (321x106mm2)
Additional Tool Components:
PQ-MDS-PIB - Platform I/O Board for the 83xx Family
- AdvancedTCA form factor with 4 PMC slots
- Allows user to expand the functionality of the MPC8323E-MDS-PB when used in conjunction with the module cards.
- PQ- MDS- PIB Board Kit
- Power cable extension with on-off switch
- 25 Pin IEEE 1284 Parallel cable
- Serial cable 10cm D25M to IDC10
- Parallel cable 10cm D25M to IDC26F
- RJ45 to IDC8F Cable (qty 2)
- LC Loop back 62.5/125Fiber (qty 2)
- USB Cable StndA Plug to MiniB 1Meter
- USB Cable MiniA Plug to StndB 1.5Meter 1
- PMC Board assembly spacers (qty 16)
- AC/DC Power Supply 48V/2.7A
- PQ- MDS- PIB Getting started guide
- PQ- MDS- PIB Board Errata
- PQ- MDS- PIB Documentation CD
PQ-MDS-PMCPCI - PMC to PCI module card adaptor for the 83xx Family
- Ability to plug in one PCI card
- Supports 3.3V 32 & 64 bit PCI Bus.
PQ-MDS-USB - USB expansion module for the 83xx Family (available separately)
- Access to 2nd USB port
- Additional USB phys (UTMI, ULPI, Serial OTG)
Increase Your Knowledge
- Design News Update Subscribe for design tips, tricks and product news delivered to your inbox.
- On-Demand Training Learn from the experts at your convenience.
