MCF5445X: 32-bit Microprocessor with USB On-The-Go, Ethernet, PCI, DDR2/DDR controller and Encryption  Favorite



Freescale MCF5445X Product Image

The MCF5445x family of 32-bit microprocessors feature a rich set of connectivity peripherals including Ethernet, USB on-the-go (USB OTG) and peripheral component interconnect (PCI).

Developed for power-conscious designers, the MCF5445x family is ideal for consumer and embedded control designs that need high-performance and connectivity.

These highly integrated microprocessors open the door to expanding application capabilities while driving down total system cost and power requirements.


Features


  • 32-bit ColdFire V4 CPU
  • Up to 410 (Dhrystone 2.1) MIPS @ 266 Mhz
  • Supply voltage
    • 3.3-volt I/O
    • 1.8 /2.5-volt SDRAM I/
    • 1.5-volt core
  • Enhanced multiply-accumulate (eMAC) unit with four 48-bit accumulators to support 16 x 16 or 32 x 32 operations
  • Memory
    • 16 KB instruction and 16 KB data cache
    • 32 KB internal SRAM
    • Support for booting from serial peripheral interface (SPI)- compatible flash, EEPROM and FRAM devices.
  • Peripherals
    • USB 2.0 OTG controller
    • ATA controller
    • 32-bit PCI controller @ 66 MHz
    • Two 10/100 Ethernet media access controllers (MACs)
    • Hardware accelerated encryption
    • Random number generator
    • I²C bus interface
    • Four periodic interrupt timers
    • Four 32-bit timers with direct memory access (DMA) support
    • DMA-supported serial peripheral interface (DSPI)
    • Three universal asynchronous receiver/transmitters (UARTS)
  • Complimentary Freescale MQX Software Solutions
  • This product is included in Freescale’s product longevity program, with assured supply for a minimum of 10 years after launch

Featured Documentation


  • MCF54455: MCF5445x ColdFire Microprocessor - Data Sheet
  • MCF54455RM: MCF54455 - Reference Manual
  • MCF54455PB: MCF5445x ColdFire Microprocessor Product Brief
  • CFMCF5445XFAMFS: MCF5445x Family ColdFire ® V4 embedded controllers - Fact Sheet
  • CFEXPNSIONPAK: ColdFire 32-bit Controllers: Product and Tool Fact Sheets

Featured Software and Tools


  • CWX-MCU-LLPLT-EX: Evaluation: CodeWarrior for Microcontrollers 10.4 (Eclipse, Offline)
  • CWX-MCU-SELH: Special Edition: CodeWarrior for Microcontrollers 10.4 (Eclipse, Offline)
  • CWX-MCU-PROED-EX: Evaluation: CodeWarrior for Microcontrollers 10.4 (Eclipse, Online)
  • CWX-MCU-SE: Special Edition: CodeWarrior for Microcontrollers 10.4 (Eclipse, Online)
  • M54455EVB: MCF54455 Evaluation Board
  • M54451EVB: MCF5445x Low Cost Evaluation Board
  • MQX: Freescale MQX™ Software Solutions
  • UMultilink: Universal Multilink Development Interface
  • USBMLCF: USB ColdFire Multlink

Target Applications



MCF5445X Family Members


MCF54450MCF54451MCF54452MCF54453MCF54454MCF54455
Core: Operating Frequency180 MHz
240 MHz
180 MHz
240 MHz
200 MHz
266 MHz
200 MHz
266 MHz
266 MHz
200 MHz
266 MHz
200 MHz
Package Description and DiagramMAPBGA 256 17*17*1.6P1.0 
MAPBGA 256 17*17*1.6P1.0 
MAPBGA 256 17*17*0.8P1.0 
360 23*23*2.23 P1 
360 23*23*2.23 P1 
360 23*23*2.23 P1 
360 23*23*2.23 P1 
Ambient Operating Temperature-40 to 85 °C
0 to 70 °C
-40 to 85 °C
0 to 70 °C
-40 to 85 °C
0 to 70 °C
-40 to 85 °C
0 to 70 °C
0 to 70 °C
-40 to 85 °C
0 to 70 °C
-40 to 85 °C
* NOTE: The SDRAM controller is capable of running at lower frequencies than some memory types support. When selecting a memory device for use with this controller, you should take into account the clock requirements for the memory along with the supported frequencies for the SDRAM controller and the resulting system frequency (SDCLK = fsys/2).

Product Specifications

Bus Frequency - Max (MHz)90, 100, 133, 120
Internal RAM (KB)32
Cache (KB)32
External Memory SupportedDDR
Serial Interface - TypeSPI, USB, I2C, UART, Ethernet, SSI
Total DMA Channels16
I/O Pins132, 93
Additional FeaturesATA Controller, PLL, Random Number Generator, Real-Time Clock, Memory Management Unit (MMU)