|
|
Not recommended for new designs. See the MC13202 for new designs.
The MC13192 is a short range, low power, 2.4 GHz ISM band transceiver which contains a complete 802.15.4 physical layer (PHY) modem designed for the IEEE 802.15.4 wireless standard supporting star and mesh networking.
The MC13192 can be a stand-alone transceiver or part of the Freescale ZigBee-ready Platform when combined with an appropriate microcontroller (MCU) and software. The MC13192 provides a cost effective solution for short-range data links and networks. Interface with the MCU is accomplished utilizing a four wire serial peripheral interface (SPI) connection which allows for the use of a variety of processors. The software and processor can be scaled to fit applications ranging from simple point-to-point systems, through complete ZigBee™ networking.
Features
Recommended power supply range: 2.0 to 3.4 V
- 16 Channels
- 0 dBm (Typical), up to 3.6 dBm maximum output power
- Buffered Transmit and Receive Data Packets for Simplified Use with Low Cost Microcontrollers
- Supports 250 kbps O-QPSK Data in 2.0 MHz Channels and Full Spread-Spectrum Encode and Decode (Compatible with IEEE Standard 802.15.4)
- Three Power Down Modes for Power Conservation:
- < 1 µA Off Current
- 3.0 µA Typical Hibernate Current
- 40 µA Typical Doze Current
- RX sensitivity of -92 dBm (Typical) at 1.0% Packet Error Rate
- Four internal timer comparators are available to reduce MCU resource requirements
- Clock output is available for use by MCU
- Seven General Purpose Input/Output ports (GPIO) are available
- Operating Temperature Range: -40°C to 85°C
- Small form factor QFN-32 Package
- Meets Moisture Sensitivity Level (MSL) 3
- 260° C Peak Reflow temperature
- RoHS compliant
Increase Your Knowledge
- Design News Update Subscribe for design tips, tricks and product news delivered to your inbox.
- On-Demand Training Learn from the experts at your convenience.
