The FRDM-K20D50M is an ultra-low-cost development platform enabled by the Kinetis K20 USB MCU family built on the ARM® Cortex™-M4 processor. Features include the Freescale open standard embedded serial and debug adapter (OpenSDA), providing easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a built-in debug interface for flash programming and run-control. The FRDM-K20D50M is supported by a range of Freescale and third-party development software.
NOTE: This product is no longer manufactured from Freescale, though limited stock may be available through Freescale distribution partners. For a similar development tool, please consider the FRDM-K22F based on the Kinetis K22 MCU or the FRDM-K64F based on the Kinetis K64 MCU.
|Start Here! Quick Start for the FRDM-K20D50M|
Get started out of the box with the FRDM-K20D50M.
|Get started with the FRDM-K20D50M and IAR EWARM|
Get started out of the box with the FRDM-K20D50M and IAR ...
|Getting started with Keil MDK uVision|
Getting started with the FRDM-K20D50M and KEIL ...
|Get Started With FRDM-K20D50M and mbed|
Upgrade your FRDM-K20D50M hardware to be mbed enabled ...