Ethernet Switch  Favorite


An industrial Ethernet switch is a ruggedized intelligent hub that connects multiple nodes to an Ethernet network.

Key Features

  • It learns the preferred destination of signals appearing at any port to direct signals only to ports where needed.
  • It can give priority to certain ports, and a managed switch has extra port for user to set functionality.
  • Processor performance can range from 200 to 1500+ MIPS.
  • On-chip memory is often greater than 256 KB L2 cache.
  • Factory automation equipment is ruggedly constructed for fanless operation in harsh industrial environments.
Freescale Ethernet Switch block diagram

Recommended Solutions


Products Features
Microcontrollers (MCU) and Processors (MPU)
P2020: QorIQ P2020/10 Single- and Dual-Core Communications Processors Dual Core, 3 x GbE, 5500 MIPS
P1020: QorIQ P1020/11 Single- and Dual-Core Communications Processors Dual core, 3 x GbE, 2760 MIPS
MPC8640: MPC8640D Integrated Dual-Core Processor Dual core, 4 x GbE, 5700 MIPS, <21W
MPC8535E: PowerQUICC III Processor with DDR2/3, eSDHC, PCI, PCI Express, SATA, SerDes, 1 GB Ethernet, USB, Security 2 x GbE, 2750 MIPS, <5W
MPC8377E: PowerQUICC II Pro Processor with DDR2, PCI, PCI Express, SATA, 1 GB Ethernet, USB, Security 2 x GbE, 900 MIPS
MPC8360E: PowerQUICC II Pro Processor with DDR2, TDM, PCI, Security, USB, QUICC Engine with 1 GB Ethernet, UTOPIA 8 x 10/100 or 2 x GbE, 1200 MIPS
MPC8315E: Low-Power PowerQUICC II Pro Processor with DDR2, TDM, PCI, PCI Express, SATA, 1 GB Ethernet, Security, USB 2 x GbE, 800 MIPS, <4W
MPC8308: Low-Power PowerQUICC II Pro Processor with DDR2, eSDHC, PCI Express, eTSEC, USB, IEEE® 1588 GbE, 632 MIPS, <1.5W
MPC8309: Low-Power PowerQUICC II Pro Processor with DDR2, eSDHC, 128-ch. HDLC/TDM, 10/100 Ethernet, USB, IEEE® 1588 One chip for PROFIBUS and app (GbE, 632 MIPS <1.5W)
MPC5121e: 32-bit Power Architecture® Microcontrollers XGA, ETH, 4xCAN, 760 MIPS, <2W
i.MX257: Multimedia Applications Processors - Data Acquisition, User Interaction, Connectivity, ARM9™ Core SVGA, ETH, CAN, 400 MHz, <1W
i.MX357: Multimedia Applications Processors - LCD controller, OpenVG, Camera Interface, ARM11™ Core WVGA, 2-D/3-D graphics, ETH, CAN, 532 MHz, <1W
i.MX537: Multimedia Applications Processors - HD Video, High-end, advanced applications, ARM® Cortex®-A8 Core VGA, graphics, ETH+CAN, 800 MHz <2W
MCF5445X: 32-bit Microprocessor with USB On-The-Go, Ethernet, PCI, DDR2/DDR controller and Encryption 2 x ETH, 3 x UART, 410 MIPS
MCF532X: ColdFire V3 Microprocessor with LCD driver, Ethernet, USB and CAN SVGA, Touch Screen, ETH, CAN, 3 x UART, 211 MIPS
MCF5225X: One-Stop-Shop Connectivity 32-bit microcontrollers 512K Flash, ETH, CAN, 3 x UART, 80 MHz
MCF5223X: Integrated ColdFire V2 Ethernet Microcontrollers 256K Flash, ETH, CAN, 3 x UART, 57 MHz
MCF523X: Integrated V2 ColdFire Microprocessor SVGA, ETH, CAN, 75 MHz
P4080: QorIQ P4080/P4040/P4081 Communications Processors with Data Path Can be used for combined control, datapath and application layer processing.
VF3xx: ARM® Cortex®-A5 based Microprocessors with 1.5MB SRAM, LCD, security, 2x Ethernet, L2 switch ARM Cortex-A5 266MHz, 1.5M SRAM, Display, dual 10/100 ETH, dual CAN, PMU, <1W
VF5xx: ARM® Cortex®-A5 based Microprocessors with 1.5MB SRAM, LCD, security, 2x Ethernet, L2 switch ARM Cortex-A5 500MHz, 1.5M SRAM, Display, dual 10/100 ETH, dual CAN, PMU, <1W
VF6xx: ARM Cortex-A5 + Cortex-M4 MPUs, 1.5 MB SRAM, LCD, security, Ethernet, L2 switch ARM Cortex-A5 500MHz, Cortex-M4 167MHz, 1.5M SRAM, Display, dual 10/100 ETH, dual CAN, PMU, <1W
Sensors
MPR121: Proximity Capacitive Touch Sensor Controller Touch Sensor (12 pads)
MPR03x: Proximity Capacitive Touch Sensor Controller Touch Sensor (2-3 pads)
MPR084: 8-Pad Touch Sensor Controller Touch Sensor (8 pads)
Power Management
MC34704: Multi-channel Power Management IC (PMIC) PMU for i.MX25
MC34708: Power Management for i.MX50/53 Processors Power Management and User Interface IC
MC13892: Power Management (PMIC) for i.MX35/51 PMU for i.MX35 and i.MX51
MC33730: Switch Mode Power Supply with Multiple Linear Regulators PMU for MCU, DSC
Switch Detector
MC34978: Switch Detection Interface, 22 I/Os, Programmable Wetting Current, Temp Sensor, 3.3 V / 5.0 V SPI 22 contacts with suppressed wake-up, programmable wetting current, temp sensor
MC34972: MSDI with Suppressed Wake-up 22 contacts with suppressed wake-up
MC34975: MSDI with Suppressed Wake-up and 32 mA Wetting Current 22 contacts with suppressed wake-up and 32 mA wetting current
Voltage Regulator or Power Supply
MC34717: 5.0A 1.0MHz Integrated Dual Switch-Mode Power Supply Dual Switch-Mode Power Supply (5A, 3.3V)
MC34713: 5.0A 1.0MHz Integrated Single Switch-Mode Power Supply Single Switch-Mode Power Supply (5A, 3.3V)
MC33742: SBC with Enhanced High-Speed CAN Transceiver Dual Voltage Regulator with CAN transceiver (5V, 200 mA)
MC34700: 9-18V Four Output, Multi-Purpose Switching Power Supply Quad Voltage Regulator (1.5 A, 9-18V)
IEEE® 802.15.4 Transceivers
MC13213: 2.4 GHz 802.15.4 RF and 8-bit HCS08 MCU with 60KB Flash, 4KB RAM 2.4 GHz Wireless Transceiver with MC9S08GT MCU
MC13224V: 2.4 GHz 802.15.4 RF and 32-bit ARM7™ MCU with 128KB Flash, 96KB RAM 2.4 GHz Wireless Transceiver with ARM7 MCU
Advantages
  • MCF5225x, MCF52235 include free-of-charge MQX or ucLinux OS for low cost solutions
  • MCF5234 includes a 16-channel enhanced Time Processing Unit (eTPU) for motor control
  • MPC512x offers up to 800 DMIPS Power Architecture core, up to XGA LCD controller, 2-D/3-D graphics, UART, USB, CAN and 10/100 Ethernet, at <2W
  • MPC8535 includes advanced power management
  • MPC8360/58, MPC832x support PROFIBUS
  • MPC8309 consumes <1.5W max power at 85C
  • Pxxx and MPC8xxx integrate a Power Architecture MPU for highest performance, up to 3000+ DMIPS, 10/100/Gigabit Ethernet MACs with hardware timestamp (IEEE 1588), USB, PCI, SPI, UART and on-chip security
  • i.MX family offers 400 to 1000+ DMIPS, up to XVGA LCD controller, multimedia video codecs, UART, USB PHY, SPI, CAN and Ethernet, at <1W. ARM core supports Windows Embedded CE and Linux OS with anti-tamper and boot protection
  • i.MX is designed for low-power and battery-operated display applications
  • MC13213, MC13224 integrate an MCU with a 2.4 GHz IEEE 802.15.4 wireless transceiver. Add an antenna and an oscillator for a complete WirelessHART, ISA100 or ZigBee wireless network solution.
  • MC33972, MC33975 offer signal conditioning and switch detection for up to 22 contacts
  • MC13892 power management IC operates -30C to +85C, and comes with software drivers and reference designs for i.MX35 and i.MX51
  • Sensors offer a small form factor, low current, sleep mode and high motion-detect sensitivity
  • Support for industrial Ethernet protocols: PROFINET, EtherNet/IP, CIP SYNC, Modbus TCP/IP, EtherCAT Master
  • Freescale product longevity program offers up to 15-year availability for selected products