IEEE® 1588  Favorite




IEEE® 1588 Precision Clock Synchronization Protocol for Networked Measurement and Control Systems or Precision Time Protocol (PTP) was developed to quickly synchronize networked clocks with differing precision, resolution and stability to better than a microsecond-level accuracy. IEEE 1588 protocol was designed for low-cost implementation, simple installation and maintenance in Ethernet networks. As an early adopter of the IEEE 1588 protocol, Freescale began shipping processors with hardware timestamp capabilities in 2007.


Featured Reference Designs


MPC8313E PowerQUICC II Pro Processor Reference Platform (MPC8313E-RDB) 
PowerQUICC Industrial Protocol Evaluation Platform (MPC8360E-RDK) 
MCF5234 Business Card Computer IEEE1588 (M5234BCCKIT)
Freescale IEEE1588 application block diagram

Recommended Solutions


Products Features
Microcontrollers (MCU) and Processors (MPU)
PXR40: Power Architecture MCU, 264 MHz, 4 MB On-Chip Flash, Quad ADCs 500 MIPS, 4M flash,10/100, 4xCAN
PXN20: Power Architecture MCU, 116 MHz, Dual-Core, Networking 230 MIPS, 2M flash,10/100, 6xCAN
PXS20: Functional Safety MCU module 2-core safety, 1M flash, 2xCAN
K60 Ethernet Crypto MCUs 150 MHz, 1M flash,10/100, 2xCAN
P4080: QorIQ P4080 Eight-Core Communications Processors with Data Path Applications processor (8 core, 8xGbE, 27000 MIPS)
P2020: QorIQ P2020/10 Single- and Dual-Core Communications Processors Applications processor (2 core, 3xGbE, 5500 MIPS)
P1020: QorIQ P1020/11 Single- and Dual-Core Communications Processors Applications processor (1 core, 3xGbE, 1800 MIPS)
MPC8569E: PowerQUICC III Processor with DDR2/3, eSDHC, PCI Express®, Serial RapidIO, SGMII, USB, Security, QUICC Engine with UTOPIA One chip for PROFIBUS and app (8x10/100 or 4xGbE, 2800 MIPS)
MPC8536E: PowerQUICC III Processor with DDR2/3, eSDHC, PCI, PCI Express, SATA, SerDes, 1 GB Ethernet, USB, Security Power Architecture® processor (10/100/GbE, >1000 MIPS)
MPC8360E: PowerQUICC II Pro Processor with DDR2, TDM, PCI, Security, USB, QUICC Engine with 1 GB Ethernet, UTOPIA Power Architecture processor(10/100/GbE, >800 MIPS)
MPC8313E: Low-Power PowerQUICC II Pro Processor with DDR2, PCI, 1 GB Ethernet, Security, USB Power Architecture processor (10/100/GbE, 800 MIPS, <4W)
MPC8309: Low-Power PowerQUICC II Pro Processor with DDR2, eSDHC, 128-ch. HDLC/TDM, 10/100 Ethernet, USB, IEEE® 1588 Power Architecture processor (10/100/GbE, CAN, 632 MIPS <2W)
i.MX28 Processors ARM9 multimedia processor (LCD, 10/100, CAN, 450 MIPS <0.5W)
i.MX537: i.MX537 Multimedia Applications Processor VGA, graphics, ETH+CAN, 800 MHz <2W
MCF5441X: 32-bit microprocessor ColdFire processor (PWM, DAC, 10/100, CAN, 385 MIPS, <1W)
Sensors
MMA8451Q: Xtrinsic 3-Axis, 14-bit Accelerometer 3-axis Accelerometer (±2g/±4g/±8g)
MMA745xL: 3-Axis Digital Output Acceleration Sensor 3-axis Accelerometer (±2g/±4g/±8g)
MMA7660FC: 3-Axis Xtrinsic Accelerometer 3-axis Accelerometer for orientation/motion detection (±1.5g)
MPR121: Proximity Capacitive Touch Sensor Controller Touch sensor (12 pads)
MPR03x: Proximity Capacitive Touch Sensor Controller Touch sensor (2-3 pads)
MPL115A: MPL115A Digital Barometer Touch sensor (2-3 pads)
MPXx5050: -50 to 0kPa and 0 to 50kPa Integrated Silicon Pressure Sensor, Temperature Compensated and Calibrated Pressure sensor (7.5 psi/50 kPA)
MPX5999: Integrated Pressure Sensor Pressure sensor (150 psi/1000 kPA)
MPXx5004: 0 to 3.92kPa Integrated Silicon Pressure Sensor, Temperature Compensated and Calibrated Pressure sensor (0.57 psi/4 kPA)
Controller Area Network (CAN) PHY
MC33904: System Basis Chip Gen2 with High Speed CAN 5-volt PMU with CAN transceiver
MC33902: High Speed CAN Interface with Embedded 5 V Supply CAN PHY with on-chip 5-volt regulator
MC33897: Single-Wire Can Transceiver Single-wire CAN PHY
Power Management
MC34704: Multi-channel Power Management IC (PMIC) Power Management for i.MX25
MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 Power Management for i.MX35 and i.MX51
MC33730: Switch Mode Power Supply with Multiple Linear Regulators Power Management for MCU, DSC
MC34708: Power Management Integrated Circuit (PMIC) for the i.MX50/53 Families Power Management and user interface IC
Switch Detector
MC33972: Multiple Switch Detection Interface with Suppressed Wakeup 22 contacts
MC33975: Multiple Switch Detection Interface with 32 mA Suppressed Wakeup 22 contacts
Voltage Regulator or Power Supply
MC34717: 5.0 A 1.0 MHz Fully Integrated Dual Switch-Mode Power Supply Dual switch-mode power supply (5A, 3.3V)
MC34713: 5.0 A 1.0 MHz Fully Integrated Single Switch-Mode Power Supply Single switch-mode power supply (5A, 3.3V)
MC33742: System Basis Chip (SBC) with Enhanced High-Speed CAN Transceiver Dual voltage regulator with CAN transceiver (5V, 200 mA)
MC34700: 9-18 V Four Output, Multi-Purpose Switching Power Supply Quad voltage regulator (1.5 A, 9–18V)
IEEE® 802.15.4 Transceivers (2.4 GHz)
MC13213: 2.4 GHz RF Transceiver and 8-bit MCU with 60K of Flash for ZigBee Applications 2.4 GHz wireless transceiver with MC9S08GT MCU
MC13224V: MC1322x Platform in a Package (PiP) 2.4 GHz wireless transceiver with ARM7™ MCU
Advantages
  • On-chip time sync hardware reduces Ethernet PHY cost and improves clock sync accuracy
  • IEEE 1588 protocol support from IXXAT and Symmetricom
  • Same device can bridge to other industrial Ethernet or field bus protocols
  • Product longevity program offers up to 15-year product availability
  • Pxxx integrates Power Architecture technology, 10/100/Gigabit Ethernet, security
  • P1011 offers highest MIPS less than 3.5W
  • MPC830x consumes <1.5W max at 85C
  • i.MX28 consumes <0.5W max at 85C
  • MCF5441x consumes <1W max at 85C
  • MC13213 only needs antenna plus oscillator for WirelessHART®, ISA100 or ZigBee
  • MC13224 only needs antenna plus oscillator for WirelessHART®, ISA100 or ZigBee
  • MMA745xL 3-axis accelerometer for orientation or motion detection
  • MMA7660 3-axis accelerometer for orientation or motion detection
  • MPXV5050 pressure sensor for vacuum pump monitoring (7.5 psi/50 kPA)
  • MC13892 operates -30C to 85C; software drivers + ref designs for i.MX35, i.MX51
  • MC33972 offers signal conditioning and switch detection for up to 22 contacts
  • MC33975 offers signal conditioning and switch detection for up to 22 contacts