A glucometer is used to determine the approximate concentration of glucose in the blood and is a key element of home-based blood glucose monitoring for people with Type 1 and Type 2 diabetes.
A blood glucose meter can allow wired or wireless communication with other devices such as smart phones, insulin dispensers or calorimeters. This can be useful for telehealth applications and remote patient monitoring.
Freescale offers specific MCUs with integrated analog blocks and ZigBee® and proprietary wireless solutions for glucometers.
Based on Continua Health Alliance standards for healthcare devices, a Kinetis MCU encapsulates the data using the IEEE® 11073 standard. In this example, a Freescale Freedom development platform operates as the near field communication board that bridges between the NFC antenna and the manager.See more demos at the Freescale Community >
|Kinetis K4x USB & Segment LCD Microcontrollers (MCUs)||MCU with ARM® Cortex�-M4 Core, 512K flash, USB, segment LCD|
|Kinetis K5x Measurement Microcontrollers (MCUs)||Integrated OPAMPS, TRIAMPS, USB, Ethernet and segment LCD controller|
|i.MX28 Applications Processors: Integrated Power Management Unit (PMU), ARM9™ Core||ARM9�, single-core, 454MHz, display, 10/100 ETH, CAN, PMU, <1W|
|i.MX6S: i.MX 6Solo Processors – Single-Core, Multimedia, 3D Graphics, ARM Cortex-A9 Core||ARM� Cortex�-A9, single-core, up to 1GHz, display, graphics, video, 10/100/1000 ETH, CAN, PCIe, PMU|
|MMA8451Q: ±2g/±4g/±8g, Low g, 14-bit Digital Accelerometer||Xtrinsic smart, low-power three-axis accelerometer|
|Keypad or Touch Screen|
|MPR03x: Proximity Capacitive Touch Sensor Controller||2 or 3-pad touch sensor|
|TSSMCU: Touch-Sensing for MCUs||Xtrinsic Touch-Sensing software, converts S08 and ColdFire V1 MCUs into touch sensors|
|CRTOUCH: Freescale Touch-Sensing Platform, a Ready Play Solution||Resistive screen controller with basic gesture recognition, and up to four capacitive touch-sensing electrodes|
|MC34712: 3.0A 1.0MHz Integrated DDR Switch-Mode Power Supply||Li-Ion battery charger, DDR switch-mode power supply (3.0A, 1MHz)|
|MC34713: 5.0A 1.0MHz Integrated Single Switch-Mode Power Supply||Li-Ion battery charger, single switch-mode power supply (5A, 1MHz)|
|MC34716: 1.0 MHz Dual Switch-Mode DDR Power Supply||Li-Ion battery charger, dual switch-mode DDR power supply (5A, 1Mhz)|
|MC34717: 5.0A 1.0MHz Integrated Dual Switch-Mode Power Supply||Li-Ion battery charger, dual switch-mode power supply (5A, 3.3V)|
Medical by Design Blogby Freescale"s medical experts