Blood pressure monitors help make precise diagnoses of patients who suffer from hypertension by implementing techniques such as oscillometric methods and Korotkoff's measurements.
They measure mean arterial pressure (MAP) and use algorithms to derive systolic and diastolic values.
Blood pressure monitors display readings on an LCD screen and are driven by a low-power, 8-bit or 32-bit MCU and incorporate a pressure sensor in either an arm or wrist cuff.
Speed development time when designing your portable medical device with Freescale's Healthcare Analog Front End (AFE) reference platform which includes a complete hardware platform, schematics and software. Based on the Kinetis Microcontroller K53 measurement.See more demos at the Freescale Community >
|Kinetis K5x Measurement Microcontrollers (MCUs)||Integrated OPAMPS, TRIAMPS, USB, Ethernet and segment LCD controller|
|MMA8451Q: ±2g/±4g/±8g, Low g, 14-bit Digital Accelerometer||Xtrinsic Low-g digital accelerometer|
|Keypad or Touch Screen|
|MPR121: Proximity Capacitive Touch Sensor Controller||12-pad touch sensor|
|MPR03x: Proximity Capacitive Touch Sensor Controller||2 or 3-pad touch sensor|
|TSSMCU: Freescale Touch-Sensing for MCUs||Xtrinsic Touch-Sensing software, converts S08 and ColdFire V1 MCUs into touch sensors|
|CRTOUCH: Freescale Touch-Sensing Platform, a Ready Play Solution||Resistive screen controller with basic gesture recognition, and up to four capacitive touch-sensing electrodes|
|MPL3115A2: 20 to 110kPa, Absolute Digital Pressure Sensor||Provides highly precise pressure and altitude data|
|MPXx5050: -50 to 50kPa, Differential and Gauge Pressure Sensor||7.5 psi, 50kPA pressure sensor|
|MPXx2050: Differential and Gauge Compensated Pressure Sensor (0 to 50kPa)||50kPa pressure sensor|
|MC34712: 3.0A 1.0MHz Integrated DDR Switch-Mode Power Supply||Li-Ion battery charger, DDR switch-mode power supply (3.0A, 1MHz)|
|MC34713: 5.0A 1.0MHz Integrated Single Switch-Mode Power Supply||Li-Ion battery charger, single switch-mode power supply (5A, 1MHz)|
|MC34716: 1.0 MHz Dual Switch-Mode DDR Power Supply||Li-Ion battery charger, dual switch-mode DDR power supply (5A, 1Mhz)|
|MC34717: 5.0A 1.0MHz Integrated Dual Switch-Mode Power Supply||Li-Ion battery charger, dual switch-mode power supply (5A, 3.3V)|
|DC Brush Motor Control|
|MPC17C724: H-Bridge, Motor Driver, 2.7-5.5V, 0.8A, 200kHz||H-Bridge Brushed DC/Stepper Motor Driver, 2.7-5.5V, 0.8A, 200kHz|
Medical by Design Blogby Freescale"s medical experts